Photos | Peddinghaus

Three punch stations per hydraulic press allow the machine to apply up to three different hole shapes/sizes per leg. A new and improved punch tool design allows for quicker and easier tool changes.

Machine: Anglemaster-663

View Full Image

The Anglemaster-663 uses a single cut 320 ton shear press for the cutting to length angle and flat stock.

Machine: Anglemaster-663

View Full Image

The SignoMat part stamping unit holds up to 36 characters, letters or numbers, and stamps at a depth of 1/32" (.8 mm) with a total height of 1/2" (12 mm).

Machine: Anglemaster-663

View Full Image

Equipped with the Peddinghaus Roller Feed measurement system, the Anglemaster-663 maximizes contact with the material at all times. This Roller Feed technology ensures a constant roll and an accurate measurement given deviations in material.

Machine: Anglemaster-663

View Full Image

Two 169 ton punch cylinders each with three punch stations per hydraulic press allow the Anglemaster-HD to apply up to three different hole shapes/sizes per leg.

Machine: Anglemaster-HD

View Full Image

The Anglemaster-HD uses a single cut 515 ton shear press for the cutting to length angle and flat stock.

Machine: Anglemaster-HD

View Full Image

The SignoScript layout marking attachment eliminates human error in manual layout methods.

Machine: Anglemaster-HD

View Full Image

Equipped with the Peddinghaus Roller Feed measurement system, the Anglemaster-HD maximizes contact with the material at all times.

Machine: Anglemaster-HD

View Full Image

Two 75 ton punch cylinders each with two punch stations per hydraulic press allow the Anglemaster-643 to apply up to two different hole shapes/sizes per leg.

Machine: Anglemaster-643

View Full Image